PLUMBING PROBLEMS
Banging or noisy pipes: what the noise is telling you
The common noises from water and heating pipes, what usually causes each one, and which ones are worth getting a plumber to look at.
IN SHORT
A single bang when a tap or appliance shuts off is usually water hammer: fast-moving water stopping suddenly. Ticking or knocking when the heating comes on is normally pipes expanding against floorboards or clips. Gurgling radiators usually have trapped air. Most of these aren't urgent, but repeated water hammer strains joints over time and is worth having looked at.
This page is part of our guide to common plumbing problems.
Which noise is it?
| NOISE | WHEN | USUAL CAUSE |
|---|---|---|
| A loud bang or thud | When a tap, toilet or appliance shuts off | Water hammer |
| Rapid knocking or juddering | While a tap is running, or a toilet is refilling | A worn valve or washer vibrating |
| Ticking or creaking | When the heating warms up or cools down | Pipes expanding against floors or clips |
| Gurgling | In radiators, when the heating runs | Air in the system |
| Whistling or humming | While water is running | High pressure, or a partly closed valve |
Water hammer: the bang when a tap shuts
Water moving through a pipe has momentum. When a valve closes suddenly, the water stops dead, and the shock wave makes the pipe jump against whatever it's fixed to. That's the bang.
It's most common with things that shut off quickly: quarter-turn and lever taps, washing machines, dishwashers and some toilet fill valves. It's louder where pipes aren't clipped firmly, because they have room to move.
Water hammer isn't an emergency, but repeated shocks strain joints and fittings over time. A plumber can usually cure it by:
- clipping loose pipes securely,
- adjusting or replacing a fast-closing valve,
- fitting a small device called a water hammer arrestor near the appliance causing it,
- or checking whether the incoming pressure is unusually high.
Knocking while water is running
A rapid judder while a tap runs, or while a cistern refills, usually comes from a worn part vibrating in the flow: a loose tap washer, or an old ball valve bouncing on the water. Fixing the tap or replacing the valve usually stops it. See dripping tap repair costs and toilet fill valve problems.
Ticking and creaking from the heating
Copper pipes expand slightly as they heat up and shrink as they cool. Where a pipe passes tightly through a joist or sits hard against a floorboard or clip, it ticks or creaks as it moves. It's annoying rather than harmful. A plumber can ease the tight spots, which usually means lifting the floorboards where the noise is.
Gurgling radiators
Gurgling usually means air in the heating system. Bleeding the radiators often cures it. If you have a combination or system boiler, check its pressure gauge afterwards, as bleeding can lower it. If the gurgling keeps coming back, or the pressure keeps dropping, get it looked at.
Anything involving the boiler itself or gas pipework needs a Gas Safe registered engineer. If you smell gas, leave the property and call the National Gas Emergency number on 0800 111 999.
When to call a plumber
- Bangs that happen every time a tap or appliance shuts off.
- Any noise with a leak, a damp patch, or a drop in pressure.
- Whistling that comes with unusually strong flow, which may mean high pressure.
Most noisy pipe jobs are an hour or two of finding and fixing. See what plumbers charge per hour.
Fill My Day is coming soon to Bristol, for jobs like this that need a plumber but not this minute. It isn't taking bookings yet. See what's launching in Bristol.
GOOD TO KNOW
Questions,
answered straight.
Why do my pipes bang when I turn off a tap?
Usually water hammer. Water moving fast through the pipe stops suddenly when a valve closes, and the shock makes the pipe jump. It's most common with quick-closing taps, washing machines and dishwashers, and loose pipe clips make it louder.
Is water hammer dangerous?
Not immediately, but repeated shocks strain joints and fittings over time. It's worth fixing, often by securing loose pipes, adjusting a valve or fitting an arrestor.
Why do my pipes knock when the heating comes on?
Heating pipes expand as they warm up. Where they're tight against floorboards, joists or clips, they tick or creak as they move. It's usually harmless, though it can be fixed by giving the pipe room to move.
Why are my radiators gurgling?
Usually air in the system. Bleeding the radiator often fixes it. If it keeps coming back, or the boiler pressure keeps dropping, ask a heating engineer to look.
FIRST STOP / BRISTOL
Bristol.
You’re up first.
The app is in development and isn't taking bookings yet. Plumbers first, other trades to follow.