fill my day Coming to BristolComing soon

COSTS

What it costs to replace a kitchen tap

What a plumber charges to fit a new kitchen tap, with or without supplying it, and the small details that can double the price.

IN SHORT

A like-for-like kitchen mixer tap costs about £110 supplied and fitted, according to MyJobQuote, or £130 to £230 if new supply pipes are needed. If you buy the tap yourself, fitting usually costs £50 to £100 outside London, says Fantastic Services. Without isolation valves under the sink, Which? says the job takes longer and costs more.

This page is part of our guide to plumbing costs in the UK. Every figure below has its source named and dated at the bottom of the page.

Cost to replace a kitchen tap in the UK

A like-for-like kitchen mixer tap costs about £110 supplied and fitted, according to MyJobQuote. If the plumber also has to run new supply pipes, it puts the price at £130 to £230. The tap itself is about £60 of that for a standard mixer.

SOURCEPRICEWHAT IT COVERS
MyJobQuote, September 2026About £110Kitchen mixer, like-for-like, supplied and fitted
MyJobQuote, September 2026£130 to £230Kitchen mixer with new supply lines
Fantastic Services, September 2026£80 to £250Supplied and fitted, outside London; £80 to £300 in London. VAT included
Which?, May 2026£50 to £200, 1 to 2 hoursYou supply the tap; isolation valves present. VAT extra
Which?, May 2026£90 to £300, about 2.5 hoursYou supply the tap; no isolation valves, system drained. VAT extra

If you buy the tap yourself

Plenty of people choose their own tap and pay a plumber to fit it. Fantastic Services puts fitting a mixer tap at £50 to £100 outside London and the South East, and £75 to £150 inside it, with VAT included. MyJobQuote gives about £50 for a straightforward like-for-like swap taking an hour.

Two things to check before you buy:

  • It fits the hole. Most kitchen sinks take a single-hole mixer. An older sink with two holes needs two pillar taps or a two-hole bridge tap.
  • It suits your water pressure. Some taps are made for high-pressure systems and run weakly on a low-pressure one. The box usually says which.

Why isolation valves change the price

Isolation valves are small valves on the pipes under the sink that let a plumber turn off just the tap. With them, the job is quick. Without them, the plumber has to shut off the water to the house, and on some systems drain it down first.

Which?'s Trusted Traders priced the difference. With isolation valves, replacing a kitchen mixer tap was £50 to £200 and took 1 to 2 hours. Without them, it was £90 to £300 and took about 2.5 hours. Many plumbers fit isolation valves as part of the job, which also makes the next repair cheaper.

What else changes the price

  • The type of tap. Boiling-water taps and filter taps cost more to buy and fit, says MyJobQuote. They usually need extra parts under the sink.
  • Access. A tap on a kitchen island, or one squeezed behind a deep sink, takes longer.
  • Old pipework. Corroded fittings or old supply pipes may need replacing. Fantastic Services says this can take a job past two hours.
  • Where you live. Fantastic Services puts London and the South East at roughly 15 to 30% above the North of England, Wales and Scotland.
  • The minimum charge. Small jobs often carry an hour's minimum. See call-out charges.

If your current tap only drips, a repair may be cheaper. See what it costs to fix a dripping tap.

Need a plumber in Bristol?

Fitting a tap is a short, planned job that suits a plumber with an hour free nearby. Fill My Day is coming soon to Bristol, free to use at launch, and isn't taking bookings yet. See what's launching in Bristol.

Where these figures come from

GOOD TO KNOW

Questions,
answered straight.

How much does a plumber charge to fit a kitchen tap?

To fit a tap you've bought, Fantastic Services gives £50 to £100 outside London and the South East and £75 to £150 inside it, VAT included. MyJobQuote puts a straightforward like-for-like swap at about £50 in labour.

How much does it cost to supply and fit a kitchen mixer tap?

About £110 for a like-for-like kitchen mixer, says MyJobQuote, or £130 to £230 if new supply lines are needed. Fantastic Services gives £80 to £250 supplied and fitted outside London.

How long does it take to replace a kitchen tap?

Usually 30 minutes to an hour for a like-for-like swap, says Fantastic Services. Which? found 1 to 2 hours with isolation valves, and about 2.5 hours without them.

Do I need isolation valves for a kitchen tap?

They aren't required for the tap to work, but they make the job quicker and cheaper. Without them, the plumber has to turn off and often drain the system. Which? priced the job at £50 to £200 with valves and £90 to £300 without.

FIRST STOP / BRISTOL

Bristol.
You’re up first.

The app is in development and isn't taking bookings yet. Plumbers first, other trades to follow.